Airsoft Canada - View Single Post

TokyoSeven · April 1st, 2013, 23:24

Just take your pistol grip for your M4 and screw it back onto the mechbox without the lower. You should be able to drop your motor back in to the grip and test that way.

My natural indication would be to go with the selector plate but since you have a mosfet installed it could be related to that. Unfortunately I have no mosfet experience so I will step back and let someone else assist with the issue.

April 1st, 2013, 23:24	#4
TokyoSeven Red Wine & Adderall Trader rating Join Date: Oct 2005 Location: Saskatoon, SK	Just take your pistol grip for your M4 and screw it back onto the mechbox without the lower. You should be able to drop your motor back in to the grip and test that way. My natural indication would be to go with the selector plate but since you have a mosfet installed it could be related to that. Unfortunately I have no mosfet experience so I will step back and let someone else assist with the issue. __________________ "Its only a little bit on fire" Last edited by TokyoSeven; April 1st, 2013 at 23:27.. Reason: Cats, so many cats.