Airsoft Canada - View Single Post

airsoftjunky · January 19th, 2013, 20:19

I'll link what i put in mine.
cylider head. screws into the
end of the piston tube: http://www.airsoftparts.ca/store2/in...oducts_id=1095

lightweight, much stronger piston: http://www.airsoftparts.ca/store2/in...oducts_id=1096

piston head: http://www.airsoftparts.ca/store2/in...oducts_id=1541

pdi hop up chamber. works only with aeg barrels. http://www.airsoftparts.ca/store2/in...oducts_id=1469

tightbore barrel: http://www.airsoftparts.ca/store2/in...roducts_id=299

barrel spacers to reduce barrel vibration: http://www.airsoftparts.ca/store2/in...oducts_id=1095

you will also need the silencer adapter, as the barrel will protrude a little bit out from the end. I anyways find that the silencer dampens the sound somewhat: http://www.airsoftparts.ca/store2/in...oducts_id=1478

And this hop up rubber: http://shop.ehobbyasia.com/upgrade-p...hard-type.html

Remember that if you use the pdi hop up chamber you will also need the aeg barrel. It will not work with the barrel that comes with the L96. Also dont forget that when you install the hop up rubber, turn the rubber a half a turn. The reason for this is the pdi hop up uses two independent arms to aply pressure the top of the bb. This allows you to adjust the accuracey very precisely. If the little nub on the new hop up is in the way, it will render the two arms useless.
Also, the Airsoft Canada store and Airsot parts.ca are two very different places.

January 19th, 2013, 20:19	#14
airsoftjunky a.k.a. evaboe Trader rating Join Date: Aug 2008 Location: saskatchewan	I'll link what i put in mine. cylider head. screws into the end of the piston tube: http://www.airsoftparts.ca/store2/in...oducts_id=1095 lightweight, much stronger piston: http://www.airsoftparts.ca/store2/in...oducts_id=1096 piston head: http://www.airsoftparts.ca/store2/in...oducts_id=1541 pdi hop up chamber. works only with aeg barrels. http://www.airsoftparts.ca/store2/in...oducts_id=1469 tightbore barrel: http://www.airsoftparts.ca/store2/in...roducts_id=299 barrel spacers to reduce barrel vibration: http://www.airsoftparts.ca/store2/in...oducts_id=1095 you will also need the silencer adapter, as the barrel will protrude a little bit out from the end. I anyways find that the silencer dampens the sound somewhat: http://www.airsoftparts.ca/store2/in...oducts_id=1478 And this hop up rubber: http://shop.ehobbyasia.com/upgrade-p...hard-type.html Remember that if you use the pdi hop up chamber you will also need the aeg barrel. It will not work with the barrel that comes with the L96. Also dont forget that when you install the hop up rubber, turn the rubber a half a turn. The reason for this is the pdi hop up uses two independent arms to aply pressure the top of the bb. This allows you to adjust the accuracey very precisely. If the little nub on the new hop up is in the way, it will render the two arms useless. Also, the Airsoft Canada store and Airsot parts.ca are two very different places.