Airsoft Canada - View Single Post - .::RA-Tech WE M4/M16 Steel Bolt Tutorial::.

Danke · November 13th, 2012, 20:20

I just got a recently restocked RA-Tech bolt from airsoftparts.ca. I could not close the receivers. This was the complete bolt with the aluminum nozzle and was installed with the RA-Tech steel trigger pack.

Removed the bolt catch and the receivers closed & the bolt cycled. I made a couple passes with a small sanding wheel on a dremel tool and re-installed the catch. The gun now runs fine. A tiny bit of drag on occasion when you pull the charging handle but it doesn't bind up solid.

November 13th, 2012, 20:20	#16
Danke Prancercise Guru Trader rating Join Date: Oct 2007 Location: Danger Zone	I just got a recently restocked RA-Tech bolt from airsoftparts.ca. I could not close the receivers. This was the complete bolt with the aluminum nozzle and was installed with the RA-Tech steel trigger pack. Removed the bolt catch and the receivers closed & the bolt cycled. I made a couple passes with a small sanding wheel on a dremel tool and re-installed the catch. The gun now runs fine. A tiny bit of drag on occasion when you pull the charging handle but it doesn't bind up solid. __________________ Airsoft, where nothing is hurt but feelings. Last edited by Danke; November 14th, 2012 at 02:24..