Airsoft Canada - View Single Post

Noob7_0 · July 3rd, 2012, 18:18

I have a MOSFET installed and my contact are clear. The selector plate is designed for an M4 with a V2.

I broke down the gun and was playing with my selector switch. I didn't have the spring installed on the selector plate. I replaced the plate with the new one and the spring and the selector works fine (I don't know why this didn't work before. It appears that the spring was allowing the selector plate to slide to far forward which was preventing the safety from engaging correctly.

I will take the gun for a spin at my next game and test the Semi-lock theory as I now have F/A to clear the lock. I will also check the screw on my cut off lever.

July 3rd, 2012, 18:18	#4
Noob7_0 Trader rating Join Date: Jun 2011 Location: Cambridge, ON	I have a MOSFET installed and my contact are clear. The selector plate is designed for an M4 with a V2. I broke down the gun and was playing with my selector switch. I didn't have the spring installed on the selector plate. I replaced the plate with the new one and the spring and the selector works fine (I don't know why this didn't work before. It appears that the spring was allowing the selector plate to slide to far forward which was preventing the safety from engaging correctly. I will take the gun for a spin at my next game and test the Semi-lock theory as I now have F/A to clear the lock. I will also check the screw on my cut off lever.