|
I had the same gun when echo 1 put this out. This gun was made by vfc but it had the echo 1 stamp on it. Vfc just re-released it with their name in it. There is no warble to this gun except for a bit in the collapsable stock. I didn't think this was made of pot metal what do ever and mine was banged around quite a but with 0 problems.
The original hop up system that. Some in mine was flawed. The small arm where the nub sat under wasn't long enough and made the hop up useless. Getting a new hop up solved the problem and it rocked.
The split mech box, similar to the ICS brands is great. Makes for a fairly easy spring swap.
I had a fukin nightmare of a time with the trigger contacts in this gun. I put about 8k rounds through it and fries the first set using 11.1 1300mah 20c lipo. I quickly went through 2 more in about 10min after installing. I put in an inline MOSFET and sondar no problems.
The gun is very lightweight and looks badass. I am getting the buffer tube stock mod for
Mine as I can't stand a peq box.
Overall I give this gun 8/10. This gun was put out at 600$ or so by echo 1. This gun is now in the 400$ range by vfc. I recommend it.
|