Airsoft Canada - View Single Post

ARC-74 · January 21st, 2012, 19:47

The newer KJW Glock's lack of a trigger safety finally got to me.
I took a piece of scrap ABS plastic used my dremel and needle files to get the shape more or less right. The pin to hold it in place is already on the trigger(one less thing to worry about). I then drilled a small hole iinside the trigger and inserted a cut down Bic lighter flint spring so the safety returns to "safe" after releasing the trigger.

January 21st, 2012, 19:47	#1
ARC-74 Can't Aim worth a damn!! old lady gives me heck for missing the toilet all the time. Trader rating Join Date: Apr 2011 Location: Montreal area & Tatooine	Making a Glock trigger safety for a KJW The newer KJW Glock's lack of a trigger safety finally got to me. I took a piece of scrap ABS plastic used my dremel and needle files to get the shape more or less right. The pin to hold it in place is already on the trigger(one less thing to worry about). I then drilled a small hole iinside the trigger and inserted a cut down Bic lighter flint spring so the safety returns to "safe" after releasing the trigger. Last edited by ARC-74; March 4th, 2013 at 12:36..