Airsoft Canada - View Single Post

ThunderCactus · July 5th, 2011, 03:20

So if anyone is interested.....
Thundercustom has built and successfully tested an AEG air brake for the MASK piston head that reduces your piston noise to pretty well nothing. Like comparable to a stock VSR-10 G-spec.
The gears and motor, however, are your problem, unless you ask me to upgrade those too lol

Anyway, the downside of course is being limited to slow semi-auto fire (triggermaster with 1 second delay is perfect) due to the fact it takes much longer for the piston to return to it's original position.
But, coupled with suppressor (foam or not, doesn't matter), this thing makes 400fps AEG's dead silent on the receiving end.

July 5th, 2011, 03:20	#10
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	So if anyone is interested..... Thundercustom has built and successfully tested an AEG air brake for the MASK piston head that reduces your piston noise to pretty well nothing. Like comparable to a stock VSR-10 G-spec. The gears and motor, however, are your problem, unless you ask me to upgrade those too lol Anyway, the downside of course is being limited to slow semi-auto fire (triggermaster with 1 second delay is perfect) due to the fact it takes much longer for the piston to return to it's original position. But, coupled with suppressor (foam or not, doesn't matter), this thing makes 400fps AEG's dead silent on the receiving end.