Quote:
Originally Posted by EscapisT
You should definitely try putting bbs behind your one of your mags' spring. If that's the issue it's worth a try.... If your highcap works then it might simply be a compatability issue.... my mags are m4 mags, but they didnt feed properly in my vfc hk416 because of a very slight difference in tolerance between the mag's catch and the magcatch in the magwell, which hold the mag up against the hopup. Mine was remedied by shaving the retainer clip, and I did ruin one of my midcaps in the process too. It's utterly useless now.
Shaving the retainer clip isn't working for you since the difference in tolerance is probably slightly larger than it was in my case. Try out some other ak mags at your next skirmish and have people try yours.
|
This problem is very rare with AK's though (mag height, etc), because in an M4 there is only one point of contact/retention of the mag whereas an AK has two.
Very strange.