G & G M16 just sprays bb's??
 

i have a G & G M16 which i got from 007 airsoft about 4 months ago thats giving me grief. i get out to my first game with it and it just sprays bb's onto the ground regardless if im single shot or full auto. took it apart and the hopup still looked normal, no wears no tares on it. anybody know a logical explanation or are there any gun doc's in Edmonton?

Improper assembly of the Hop up rubber. Either that or missing the hop up nubbin.

This happens no matter what setting you set the hop up at correct?

nubbin is there, is facing 90 degrees to the barrel

take out the hop up unit, look through from the hop up side. Turn the hop up to max. Do you see the rubber coming down?

comes down but not very far when its fully maxed out

take a pic, ill take a look at it

alright il get some pics up tommorrow, dont have my camera at home right now.

alright sorry for the wait, im fighting a nasty flu (surprisingly not swine flu)

anyway here they are

[IMG]http://img31.imageshack.us/img31/6691/img0087.jpg

http://img31.imageshack.us/img31/9332/img0088.jpg

Skladfin was most likely asking for pictures to be taken down the hopup into the barrel. The outside of the hopup doesn't really tell us anything.

If you have a 'macro' setting on your camera, remember to turn it on.

sorry my camera is pretty shitty, here are a few pictures i hope they help.

http://img193.imageshack.us/img193/5245/cimg0123d.jpg


http://img32.imageshack.us/img32/4721/cimg0126.jpg



http://img43.imageshack.us/img43/6845/cimg0121.jpg

did you oil it?

Your hopup is assembled wrong. See that nub bit inside? It should be in line with the vertical axis of the hopup unit, not on an angle like in the pictures.

nope. its only about 3 or 4 months old and hasn't even had a mag go through it.

Yup, like The Saint pointed out, the hop up is not lined up. It's cricket to the left side of the barrel. You would have to disassemble the hop up unit and take out the barrel + Hop up rubber. and Reinstall it back in properly.

the below link is a fairly good tutorial

http://www.airsoftretreat.com/review...uct=118&cat=49

Hope that helps.

PS: If you absolutely can not fix the problem, send it to me and I will fix it for you for $10 excluding shipping

is there supposed to be a black rubber ring the large gear sits on??