Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Doctor's Corner (https://airsoftcanada.com/forumdisplay.php?f=18)
-   -   V2 firing full auto on safe mode? (https://airsoftcanada.com/showthread.php?t=76629)

Shirley February 11th, 2009 18:10

V2 firing full auto on safe mode?
 
Errrmmm...

So I decided to ditch my TM lower and found another lower, but anyways, somehow, when I put the gun to safe, sometimes it fires full auto when just touching the gun, and not the trigger.. Why? :S

I almost shit my pants hearing the thing go full auto on a lipo and scared of the gearbox lol...

CDN_Stalker February 11th, 2009 18:25

Sounds like things are too tight around where the selector plate is. DOes the selector lever move nicely or doe sit feel like it's binding up? And is this after you put the different lower on, or it worked for a while and now does it? Odd problem, I haven't even heard of anything like this before, and I've seen some pretty fucked up shit in AEGs!!

Shirley February 11th, 2009 18:32

It does move, and I am sure there is space. It's not even stiff. So everytime I fire in Semi and Full, and put it to safe, 3 out of 4 times, it would randomly fire on safe and then I would have to put the switch to semi to stop the firing..

Shirley February 11th, 2009 19:03

Quote:

Originally Posted by m102404 (Post 917316)
Full tear down and sort out your wiring/switch assembly. Did you go into the mechbox?....did you knock the selector plate spring out?

Tys


Ughh, I hate opening it up.. I'm not sure if I did. But it does sound like it.

Shirley February 11th, 2009 19:28

The spring is in there and it's fine. I looked at the selecteor plate and its working, even my trigger gets locked.

Shirley February 11th, 2009 19:38

Update!

I was switching from safe to semi about 3-4 times and I saw this orange spark bolt shooting out under the trigger to the metal trigger guard. so what's happening?

RGauvin February 11th, 2009 19:46

Quote:

Originally Posted by Mr.Hitman (Post 917364)
Update!

I was switching from safe to semi about 3-4 times and I saw this orange spark bolt shooting out under the trigger to the metal trigger guard. so what's happening?

My unexperienced opinion is that it sounds like a short.

Styrak February 11th, 2009 20:29

Quote:

Originally Posted by Mr.Hitman (Post 917364)
Update!

I was switching from safe to semi about 3-4 times and I saw this orange spark bolt shooting out under the trigger to the metal trigger guard. so what's happening?

Yup sounds like a short of some sort.

Shirley February 11th, 2009 20:55

Quote:

Originally Posted by Styrak (Post 917391)
Yup sounds like a short of some sort.

But it still runs though, what's a short circuit. I'm so noob with these electrical stuff..

CDN_Stalker February 11th, 2009 21:01

Quote:

Originally Posted by Mr.Hitman (Post 917364)
Update!

I was switching from safe to semi about 3-4 times and I saw this orange spark bolt shooting out under the trigger to the metal trigger guard. so what's happening?

You realize that is literally an inch or bit more distance, right? Even if you have 50,000 volts running through there, you'd likely not see that. Give a better explanation as to where the spark comes from and where it exactly goes to. You do have a short somewhere, but it's not from the trigger contacts to the trigger guard.

Shirley February 11th, 2009 21:04

Quote:

Originally Posted by CDN_Stalker (Post 917416)
You realize that is literally an inch or bit more distance, right? Even if you have 50,000 volts running through there, you'd likely not see that. Give a better explanation as to where the spark comes from and where it exactly goes to. You do have a short somewhere, but it's not from the trigger contacts to the trigger guard.

I'm not sure, I was just testing how the fire selector plate was moving, and then, switching safe to semi and back, I see some light orange spark/bolt thing coming from the top front of the trigger shooting to the trigger guard.
What's causing this a short circuit?

Styrak February 11th, 2009 21:18

Quote:

Originally Posted by Mr.Hitman (Post 917417)
I'm not sure, I was just testing how the fire selector plate was moving, and then, switching safe to semi and back, I see some light orange spark/bolt thing coming from the top front of the trigger shooting to the trigger guard.
What's causing this a short circuit?

Gun doctor time!

Spawn28 February 11th, 2009 21:35

I would get that fixed before ya end up shorting out your lipo and it going BOOM on ya

and they a very big nasty BOOM too

Shirley February 11th, 2009 21:41

I'm going to cry...

It took me about 4 hours last time to assemble my gearbox..
Going to get my tylenol ready this time.

Shirley February 11th, 2009 21:54

Okay I opened it. So the problem was that one red wire was spliced by that little pin that goes through the gearbox and body.. Was that the short circuit?


All times are GMT -4. The time now is 04:40.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.