Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Doctor's Corner (https://airsoftcanada.com/forumdisplay.php?f=18)
-   -   KWA M4A1 issue? (https://airsoftcanada.com/showthread.php?t=66435)

WitchHunt September 1st, 2008 01:21

KWA M4A1 issue?
 
Hey everyone,

I tried looking for the answer but could not find what i needed. I have a M4A1 from KWA and all i know is that it is stock. I just tried it at a game but it would not fire. I tried various mags and it still would not fire just shoot air. When i take a mag out the bb's just fall out that loaded into the rifle. Anyone might know what the exact issue could be? any help would be great.

Regards

Drache September 1st, 2008 01:23

hopup problem? check the barrel for jams?

Denver Keith September 1st, 2008 01:50

Aside from the stock hi-cap, the other mags I used were milled to fit a KWA M4 specifically. Might need to do a bit of grinding on your mags.

Skladfin September 1st, 2008 01:52

what magazine are you using?

its likely to be a magazine problem than a gun problem

dpvu September 1st, 2008 02:04

If your hop up is too high that can cause feeding problems too. Turn it off and test and if not that then it's more than likely the mags.

WitchHunt September 1st, 2008 12:27

thanks guys ill check that out today but i keep hearing about grinding stuff just don't know exactly what that is yet? When you say gind the mag down, what exactly does one have to do for that?


All times are GMT -4. The time now is 16:23.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.