Tokyo Marui Hi-Capa 4.3 Tactical Workhorse
 

Tokyo Marui Hi-Capa 4.3 Tactical Workhorse

http://www.pbase.com/illusive_airsof...6/original.jpg

Built this on another brand new Hi-Capa... 4.3 length this time and was aiming for more of a "Tactical & Practical Workhorse" piece.

http://www.pbase.com/illusive_airsof...7/original.jpg

Internally, there isn't much done - just an Airsoft Surgeon Light Weight blowback unit for lighter and faster performance of the slide along with a Shooters Design POM Cylinder Set for durability, since the stock one is prone to breaking under higher pressure.

http://www.pbase.com/illusive_airsof...9/original.jpg

The 4.3 was a great platform for this piece - with a shorter stroke length than the 5.1, lighter slide weight plus the full length limited frame, it is both practical and aesthetically pleasing. The looks and the feel are enhanced with the Tanio Koba tactical grip which gives a familiar single-stack feel and look to the gun.

http://www.pbase.com/illusive_airsof...3/original.jpg

http://www.pbase.com/illusive_airsof...5/original.jpg

The integrated lanyard loop allows attachment of a tactical retention device to prevent loss of the weapon.

http://www.pbase.com/illusive_airsof...4/original.jpg

Matched up with low profile Novak type rear combat sight and a dotted front sight, this low drag setup minimizes chances of catching the sights on any gear as you draw it for use.

http://www.pbase.com/illusive_airsof...1/original.jpg

The undermount rail allows for attachment of weapon lights, lasers, or light/laser modules.

http://www.pbase.com/illusive_airsof...0/original.jpg

The Airsoft Surgeon CNC machined T6061 aluminum metal slide provides lightweight, strong, precise and smooth movement throughout its entire stroke while serving as a very durable part. If you've seen an Airsoft Surgeon slide before, you'll know that their slides are top-notch and rival, if not surpass the quality of even Shooters Design metal slides in fit and finish. And if you haven't seen one yet... well... you have to.

http://www.pbase.com/illusive_airsof...2/original.jpg


Externals
Gun: Tokyo Marui Hi-Capa 4.3
Capacity: 28+1
Slide: Airsoft Surgeon, OPS-TACTICAL CAL.45, Black
Barrel: Shooters Design 4.3
Chamber: Shooters Design Nowlin 45ACP
Grip: Tanio Koba Tactical Grip, Black
Everything Else: Stock

Internals
Blow Back Unit: Airsoft Surgeon Lightweight
Nozzle: Shooters Design POM
Valve Blocker: Shooters Design POM
Everything Else: Stock


http://www.pbase.com/illusive_airsof...8/original.jpg

Performance-wise, this gun has a lot of potential, but other than the blowback unit and Shooters Design POM Cylinder kit, it's all stock and chronies @ 275fps on propane shooting 0.20g BBs.

The light weight blowback unit was chosen to minimize slide weight and to allow a relatively light performance using stock springs and stock flow valves.


Want to see larger sized photos? View here: http://www.pbase.com/illusive_airsof...ticalworkhorse

dude that's one beautiful piece, tempts me for sure.... o_0

+1

seeing this just makes me wanna give you money for some reason lol O.o

So Illusion... uhmm... Do I... uh... pay you now?

daymmn that's one hot tactical grip!

Brian, how much projects of hiicapas do you have? LOL
They're so hot!

Sources tell me that when Brian exhales he isn't exhaling carbon-dioxide.. He's exhaling Hi-capa race parts..

And he's not
 

all show no go,

The man is a lighting fast dead accurate shooter as well,

Come by the CAPS competition friday and see for yourself

I have way too many... I build them faster than I can take photos of them. I take photos of them faster than I can process the photos.

I have photo sets of three more Hi-Capas waiting to be processed, two or three more hi-capas that need to be photographed and about 5 more Hi-Capas that still need to be built.

... hmm... okay, make that 6 more Hi-Capas. I just found another part I wanted to build another project around.

LOL just too many huh.

I'm waiting to see your whole group pictures of them Hi-Capas. :D

Nice 4.3. It looks like a good special ops weapon.

Who carrys that grip? I cant find it on redwolf site.

I think Dentrinity have it....at least thats where I got mine from....

Well I must say, for a 1911, it's gorgeous.

I usually hate High-Capa. But this on is pretty cool and nice looking.

Nice job ILLusion