Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Airsoft Guns Discussion (https://airsoftcanada.com/forumdisplay.php?f=53)
-   -   mp7 battery (https://airsoftcanada.com/showthread.php?t=58793)

shadowninja May 11th, 2008 19:53

mp7 battery
 
anyone know the battery name ie LR44 or AAA

im trying to find a charger that wont over charge the battery's but ive had no luck and no place i go to has any idea what battery's they are even when i show then one .

any ideas where i should look for a charger that will fit them

ILLusion May 12th, 2008 13:17

It's simple, you take the charger that it came with, clip the wall wart off it - now you have an adapter. Strip the leads, figure out which is positive and which is negative and just plug it in to your standard hobby charger. Instant peak detection / fuzzy logic charging.

If you're looking specifically for a stand-alone charger, I can source it for you, but for the cost of them, you might as well just put it towards a full on charger that can handle all of your batteries.

Unless you're looking at airsoft stores, there's NO WAY you'll find a charger for the MP7 pack. It's a proprietary pack made from Sanyo Cadnica N-500R 500mAh cells. Keep in mind that a pack is not a cell and a cell is not a pack. A cell is a part of a pack, and a pack is a collection of cells to achieve the required voltage. Rechargeable cells put out a nominal voltage of 1.2v. So if you needed a 7.2cell output, you would need to create a pack of six 1.2v cells. An LR44 or AAA battery is just a cell.

To directly answer your question, they are "N" sized cells.

The Saint May 12th, 2008 13:20

http://www.wgcshop.com/pcart/shopper...%20Dischargers

Specify North American adaptor when ordering.


All times are GMT -4. The time now is 03:21.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.