Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Airsoft Guns Discussion (https://airsoftcanada.com/forumdisplay.php?f=53)
-   -   KSC G23F Manual (https://airsoftcanada.com/showthread.php?t=53915)

Qlong March 1st, 2008 22:52

KSC G23F Manual
 
Again, my last resort creating a thread to ask all you nice folks if there is a manual scan for the KSC G23F? I'm actually trying to adjust the rear sight.

Thanks

Qlong March 1st, 2008 23:09

FOUND!!! after 23min ...by accident

Still don't know how to adjust sights tho

Styrak March 1st, 2008 23:50

Don't think you can adjust sights on Glocks.

Qlong March 2nd, 2008 00:06

If thats true, then thats retarded.

Bah, mine shoots 4inch consistently to the left at 30 ft.

Wilson March 2nd, 2008 00:56

Rear sight on a Glock does not adjust.

Qlong March 2nd, 2008 01:17

Alright, thanks for the confirmation, does it at least move side to side or detach? I know the front does.

Styrak March 2nd, 2008 01:39

Quote:

Originally Posted by Qlong (Post 658390)
Alright, thanks for the confirmation, does it at least move side to side or detach? I know the front does.

Real steel don't shoot 4 inches to the left at 30 feet, so you don't have to adjust them :D

And the sight can detach, but that means unscrewing a screw that connects the sight to the slide internals. And that screw keeps the slide internals in place.

EDIT: Wait a second I was thinking of TM's and KJW's. On a KSC you should be able to adjust the rear sight side to side because KSC uses an internal screw to keep the internals in place. Just tap it to the side. Might stick out a bit on one side though, depending on how much you need to adjust it.

Steve_U1S March 2nd, 2008 01:40

You're completely wrong - the rear sight can be drifted as much as you please. Just needs some controlled taps - often carefully applied side-of-knuckle pressure can get them moving.
There's no lock screw on there at all. It covers the set screw that holds the retainer pin for the fire-mode selector lever, and hides the brass threaded insert which is the receiver for the blowback chamber from inside the slide.

Trust me on this - I own 5 KSC Glocks, 2 of which are G23Fs.

Styrak March 2nd, 2008 01:43

Yeah I just realized I was thinking of the wrong gun and changed my post.

Qlong March 2nd, 2008 02:22

Ah, thank you kinds sirs. Some controlled taps did the trick.


All times are GMT -4. The time now is 00:37.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.