Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Upgrades & Modifications (https://airsoftcanada.com/forumdisplay.php?f=24)
-   -   VFC FN SCAR Question (https://airsoftcanada.com/showthread.php?t=51330)

KillerCreed January 24th, 2008 22:28

VFC FN SCAR Question
 
I recently got a VFC FN SCAR from A&A and love it.


It came with a shorter inner barrel so that I can use it for CQC. I got as far as having the hop up chamber out along with the mechbox and so forth.

My question is:

How can I remove the STD inner barrel and switch it with the CQC one?

NOTE: I will post pics to show you exactly what I mean either tomorrow or the day after.

Danke January 24th, 2008 23:06

Go here for a review including photo's of the barrel swap
http://www.arniesairsoft.co.uk/revie.../cat/16/page/1

So once you spin the grub screws loose the inner barrel and hopup slide out. You need to pop the C-clip off the bottom of the hopup and then slide it off the barrel. The hopup rubber will probably stick on the barrel so slide it off an give it some silicon oil so it goes back together without drama. Snap the C-clip on etc. assemble in reverse.

KillerCreed January 24th, 2008 23:09

Thanks Danke

KillerCreed January 25th, 2008 10:52

Does anyone else besides me have a VFC SCAR L? If you do what were you shooting at right out of the box?

Cassius January 25th, 2008 11:59

I'm receiving mine this Tuesday as well as an AAC flash hider, 10 KA DE mags and some batteries.

My question is, can we buy a VFC SCAR hopup unit??

I'm thinking of buying another hopup unit, attaching it to the CQC barrel and therefore it would be quite easy to switch in between STD and CQC; I would only need to remove the full inner barrel assembly and replace it with the other instead of messing up with the hopup rubber each and every time.

Danke January 25th, 2008 12:59

I'd love another hopup assembly since I haven't swapped barrels since I tried the first time. Something will go wrong, if I swap between the long and short for sure.

KEVORKIAN January 25th, 2008 13:06

Quote:

Originally Posted by Gaius (Post 624556)
Does anyone else besides me have a VFC SCAR L? If you do what were you shooting at right out of the box?


I chrono'd mine at 325 - 330 fps with .20 Metal Tech.

I did a second test with .20 KSC Perfect bb's... chrono'd at 345-355 fps...

Cassius January 25th, 2008 15:00

Thanks Kev, I was wondering as well.

KillerCreed January 25th, 2008 21:07

Anyone tried getting it chronied with XT's bb's?

KEVORKIAN January 25th, 2008 22:10

Quote:

Originally Posted by Gaius (Post 624994)
Anyone tried getting it chronied with XT's bb's?


XT uses Airsoft Elites...correct?

Shoot !! All I have is .25's in AE.

KillerCreed January 25th, 2008 22:42

i wouldn't know, i'm askin this due to that i got it chronied the day i got it and it just came from outside and did about 320 which is low for VFC. might have to break it it and also have it warmed up b4 using

KillerCreed March 13th, 2008 22:05

it shoots under 320fps

Blastyman March 13th, 2008 23:11

mine is shooting 300 w .20

KillerCreed March 13th, 2008 23:50

Quote:

Originally Posted by Blastyman (Post 668882)
mine is shooting 300 w .20

once i put a systema ftk in it, it will shoot between 349-360

Amos March 13th, 2008 23:54

Quote:

Originally Posted by Gaius (Post 668915)
once i put a systema ftk in it, it will shoot between 349-360

Why upgrade it past XT limits? I don't think I've seen you at a single outdoor game... ever..


All times are GMT -4. The time now is 09:22.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.