Where can I get a black tip for a UTG mp5?
 

Anyone know where I can get a black tip for a UTG MP5?

http://photos.returners.org/albums/U...6901.sized.jpg
(Taken from staticzero from arnies)

I live in Vancouver BC btw

Can of Krylon Flat Black spraypaint?

Litreacola?

If the UTG MP5 faithfully cloned the TM nozzle, you can probably use a TM's.

It didnt its one of the few differances between them. Your pretty much sol but i do believe the neonfire guns use the same flash supressor.

Yea its one of the things diffrent from the TM's

So im trying to see where i can get one that will fit

Its not worth the trouble when you can just paint it.

go to crappy tire and get a paint formulated for plastics and abs in the automotive section (they call it trim paint). it will stick the best. for about 9 bucks you can paint it in about 10 minutes. finding one with those threads won't be easy.

Would that be the best way of painting it?

Or will a flat black spray paint be better?

if you get the trim paint it's usually flat black (just like the trim on you're car or truck) it's pretty durable and withstands temp changes and moisture. i would sand the flashider with a 240 grit automotive sandpaper to scuff it up some them apply a series of light coats. may take a few for complete coverage. make sure to wait an hour or so between to let each coat set up. make sure to get the inside of the flashider as well (mostly around the tip as it may still be visible).

should he tape the threads up or would it be ok?

It would make more sense just to mask the threads, they will be inside the gun so the orange isn't an issue. It would just be safer not to bother painting over the threads.

you can tape the threads if you want, but with the smooth finish on that plastic, the paint probably won't adhere that well there. not a bad idea though.

one word. sharpie

Yeah, let's get ourselves a big shiny tip... if they make flat black sharpies, I will withdraw my comment.

By the way, grave digger.