WE M4 GBBr receiver Pins
 

Hey guys,

yesterday I accidentally pushed the rear pin a bit too hard and broke the spring that put tensions between the pin and lost the (probably) ball bearing that keeps the pin in place

Anyone knows where I can get a new spring/bearing for this? Or a whole new pin that would come with spring/bearing?

Thanks

Just go buy some real steel pins for it. They fit.

Definitely. I got a little spares kit out of Wolverine Supplies.

Thanks
Will take a look at these then

Hmmm can't seem to find them on their site

Did see AR10 Takedown pin but these doesn't seem to come with the spring/detent thing?

Ok, here you go:

http://www.wolverinesupplies.com/det...ot-Detent.aspx

http://www.wolverinesupplies.com/det...Pivot-Pin.aspx

http://www.wolverinesupplies.com/det...edown-Pin.aspx


And for the springs Brownells has them and appears to ship to Canada.

http://www.brownells.com/rifle-parts...prod41437.aspx

I know for a fact that Wolverine used to have Daniel Defense springs for these, because I found an old invoice where I ordered one from them. However, they no longer seem to stock them for whatever reason.

Really couldn't find the detent and spring :/

Thanks for the Spoon! :D

Or this for springs.

http://www.wolverinesupplies.com/det...ement-Kit.aspx

You can use the spring out of the BIC lighter to great effect (I've done this on my WE's in the past, its actually better than the WE spring.

The detent can be made out of a finishing nail and some time with a file to radius the nose.

There, I solved your problem for about $2 worth of parts, or free if you have it laying around the house.

Or you just cut a nail's end and put it to replace the ball/bar that locks the pin.

Good point
I might just do that
I was under the impression the bic's spring would be bigger

They are also the perfect size for those fiddly springs in the Tokyo Marui BlowBack unit on most of their GBBs.

(Hint, it's the spring under the flint.)

Yup I know which spring tot meant :P
Thanks, now will go buy some lighters :P

Do you have the pics of the parts you are looking for, I have some WE M4 and PDW parts lay around to give away.

I'm taker
Wanna send them in envelope or something?