VSR10 Laylax Hop-up/ Air chamber
 

I just ordered a Laylax air chamber/ hopup unit and a Prometheous 6.03mm AEG inner barrel that is 550mm long. Does anyone have any history or info on this set up. Will a 550mm inner be too much for my set up or will i have to go shorter inner barrell. Possibly go with a bore up kit?

I should add that I have:
PSS10
Laylax teflon cylinder
Laylax Zero trigger w/ orange piston
Laylax Cylinder head
Laylax 170 spring
Laylax bearing spring guide.

I have also installed a threaded adapter on the end of my outer barrell and lathed up a custom teflon silencer to hide the 3 or so inches it will stick out the end of the outer barrell.

Thanks in advance for any info folks.

I also wonder if the hop up bucking that comes with this new Laylax hopup will be hard enough or if I will need a harder one possibly by Nineball or ?

I plan to use about a .4g bb with this set up when finished.

Anyone have any info on the Laylax hop up? Any links or anything?

I am currently using one and had it for 4years. The hop rubber is good enough for .40 and .43

Thanks a lot damage. I should receive mine tomorrow hopefully from Airsoftparts.ca. I also got a Prometheuos 6.03 555mm AEG tight bore to go with it.

Question is, why do you even need such a barrel?
My VSR runs a 430mm 6.03 barrel, with the more effective marui VSR style hop rubber.
Using a firefly hard rubber I'm achieving amazing range and accuracy.
I'm still using 2" of the stock silencer, which in addition to my custom made air brake, completely nullifies any sound that may be projected. The only thing you hear from 10 ft is my trigger clicking and the BB ripping through the air.

My rifle was pitted against an exact internal replica, except with a significantly longer barrel and extra 90fps. My rifle was more accurate and only fell 15ft short.

Wow really great to know. Do you have pics of your airbrake done. I only ordered this barrell cause the price was right and i needed an AEG barrell due to the new hop up. I love the design of the VSR hop up. I just hope this new one is the same design and the original hop up lever will fit. My old hop up broke apart really badly. There are no guides or installs anywhere on this thing.

Sent from my Full Android on S5PV210 using Tapatalk

I did, think I deleted them
It's a 3" brake with a hole through it for the VC piston