Airsoft Canada - Tanio Koba TWIST Inner Barrels.

Page 4 of 9

Show 100 post(s) from this thread on one page

Airsoft Canada (https://airsoftcanada.com/forums.php)

- Upgrades & Modifications (https://airsoftcanada.com/forumdisplay.php?f=24)

- - Tanio Koba TWIST Inner Barrels. (https://airsoftcanada.com/showthread.php?t=27059)

Tankdude

January 4th, 2007 08:56

I canceled my barrel order. Too much bling for this time of year. Just going with my locap order.

Kurgan

January 4th, 2007 10:18

Too bad man, but you don't really need on with that M14 hitting so well as is.

vatek

January 4th, 2007 10:39

I've got an M14 length one, going to try it in mine once I acquire a chrono. If it doesn't work I'm just going to get a Prometheus tightbore instead.

thorvald

February 6th, 2007 17:51

I have one coming for my C7A2 project (M16 length).

What spring do you recommend Brian?

I might try to install it in my ICS M4 for some testing (since it is SO much easier to swap springs in that fellow compared to a damn V2 mechbox).

Cheers

Sadiztix

February 6th, 2007 18:12

i've got one in my umg
it's sexy
now you're staring down the all black barrel

ILLusion

February 6th, 2007 19:44

Quote:

Originally Posted by thorvald (Post 419830)

I have one coming for my C7A2 project (M16 length).

What spring do you recommend Brian?

Anything that shoots 1Joule or less. I recommend a Prometheus MS100SP. Great springs, and ANODIZED BLUE!!! SWEEEEEET!

Aaidin

February 7th, 2007 14:20

I have a question. If the barrel is designed to create a cyclone around the BB to cushion it and give it a more stable flight path does the length of the barrel effect how well it works? For example, my G36C has a tiny barrel (in comparison) does the full effect of the TK barrel come into effect with the BB only going for that distance within the barrel?

ILLusion

February 7th, 2007 15:44

I haven't noticed that at all.

Aaidin

February 7th, 2007 18:18

Quote:

Originally Posted by ILLusion (Post 420369)

I haven't noticed that at all.

Awesome, thanks, got one of these barrels on order to go with my standard spring/bushing upgrade for my TM G36C. I'll probably write a review once it get's installed and I've played with it for a game or two.

CDN_Stalker

February 7th, 2007 19:29

Quote:

Originally Posted by ringsted (Post 402946)

ill be reciving a 509 mm tanio koba barrel, and putting it in my M170 tuned rifle on FA, with around 24 RPS. then we will see if they are truly unsuited for high fps upgrades. som guys in denmark thinks they are fine for fps over 400 also, thats why i want to try this, to see if they are right since mine are around 578 fps. i will be reciving it around the 14th, and trying it out in a game the 28th, i wont do any target shooting only real testing. to see if the bullet trajectory is screwed or if it is level.

Am looking forward to your results, keep us informed. :)

Shinjin_MC

February 7th, 2007 19:41

I have one in my hicapa
its makes it a lot more fun to look down the barrel

Oz	February 7th, 2007 19:52

For all those wondering I have one installed on my M14 with an MS120 spring (among many other things) and proformance is quite dissapointing. Accuracy and range are probably on par with a stock barrel but keep in mind this setup is shooting well over the 1J mark. Im just too lazy to throw my Prom back in.

In short, they suck above 1J, keep it low.

ThunderCactus

April 22nd, 2007 21:30

so do we have any results at all on these barrels yet?

The Saint

April 22nd, 2007 21:37

I've had one in my WE1911 for a number of weeks now, but I've only gotten to use it indoor. It's pretty close to a laser at 25', though. My first outdoor game with it will be this coming Sunday, I should have some observations then.

Aaidin

April 22nd, 2007 22:32

Mine wasn't doing anything in a stock P90, so we'll see what happens once the P90 starts shooting closer to 330 fps, because right now it's just a waste of money, basically just turned the inner barrel black.

All times are GMT -4. The time now is 23:57.

Page 4 of 9

Show 100 post(s) from this thread on one page