Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Accessories Discussion (https://airsoftcanada.com/forumdisplay.php?f=25)
-   -   Mag compatablity in GBBs (https://airsoftcanada.com/showthread.php?t=9797)

Rusty Shackeford June 8th, 2005 15:53

Quote:

Originally Posted by Lisa
If you don't know from experiance DON'T post!

Experience is how you spell that

Grim Fandango June 8th, 2005 15:55

Quote:

Originally Posted by KwokwaiWu
KWA/Springtime Beretta M92FS are compatible with WA Beretta M92FS Magna systems
The same for the KWA/Springtime Colt Govt single stack 1911 and the WA equivalent.

You sure about this? I thought KWA were Taiwanese copies of KSC. Also, springtime is STTI. Which is a taiwanese distributor for other manufacturers such as KJW, HiTec, WE and Y&P.

Grim Fandango June 16th, 2005 22:59

Thought I might add this bit of info. I was comparing a WE Metal Hicapa with a TM Hicapa and noticed the valve on both looked different. However the mags are interchangable. The TM mag worked in the WE.

Kwokwai June 16th, 2005 23:46

Quote:

Originally Posted by Grim Fandango
Quote:

Originally Posted by KwokwaiWu
KWA/Springtime Beretta M92FS are compatible with WA Beretta M92FS Magna systems
The same for the KWA/Springtime Colt Govt single stack 1911 and the WA equivalent.

You sure about this? I thought KWA were Taiwanese copies of KSC. Also, springtime is STTI. Which is a taiwanese distributor for other manufacturers such as KJW, HiTec, WE and Y&P.

Yes, from experience. I'm talking pre-KSC clones. KWA used to produce WA clones. Springtime used to sell KWA a long time ago. We're talking way back in '94 - 96 here with the WA Magna system and pre-hopup.

Grim Fandango June 16th, 2005 23:51

Quote:

Originally Posted by KwokwaiWu
Quote:

Originally Posted by Grim Fandango
Quote:

Originally Posted by KwokwaiWu
KWA/Springtime Beretta M92FS are compatible with WA Beretta M92FS Magna systems
The same for the KWA/Springtime Colt Govt single stack 1911 and the WA equivalent.

You sure about this? I thought KWA were Taiwanese copies of KSC. Also, springtime is STTI. Which is a taiwanese distributor for other manufacturers such as KJW, HiTec, WE and Y&P.

Yes, from experience. I'm talking pre-KSC clones. KWA used to produce WA clones. Springtime used to sell KWA a long time ago. We're talking way back in '94 - 96 here with the WA Magna system and pre-hopup.

Ahh ok. Gotcha.

Kwokwai June 17th, 2005 09:37

Slight addition. Actually Springtime sold KWA up until '99 or '00 even iirc when KWA was cloning the WA hopup system. I believe I remember seeing them on some of their Beretta 92FS models.

Dicey December 10th, 2006 18:08

Wow
 
Sorry for my VERY noobish Question... are the G19 or G23F's from both KWA and KSC compadible because i dont exactly feel like paying the extra money for the KSC mags.



Dont Flame me just because i mostly have no knowledge of KWA/KSC :D

BBS December 10th, 2006 18:29

all the glock mags that KSC produces are compatible with all the KSC/KWA glocks they make.

the glock 19's mag is shorter than the G23F's

ILLusion December 10th, 2006 19:20

Quote:

Originally Posted by BBS (Post 392665)
all the glock mags that KSC produces are compatible with all the KSC/KWA glocks they make.

the glock 19's mag is shorter than the G23F's

Actually, the G19 and G23F share the exact same frame and can use the same (20 round) mags as each other.

*SOME* (not all) G23F's come with G17 (23 round) magazines along with a grip extension so that the fit looks more integrated.

Bob the Angry Potato December 10th, 2006 19:32

Marui M9 magazines work with HFC M9 magazines, and vice versa. I've found HFC's much better, at least in my opinion and experience.

With KJ mags, I don't know.

No_Way April 19th, 2008 11:47

Necro.

KJW mag work in the HFC beretta but something touch the valve when you insert it. Put it in fast and you're ok. Work fine. Cheaper than hfc beretta mag.

With the HFC one, you fill bb by the bottom and not from the lip...work but designed to be by the bottom.

Jaaks May 16th, 2008 17:37

Anyone know what Mags are compatible with the new KWA M4A1/M4 S-system?

Also what mags would fit the KJW P226? I've read the TM P226 mags are slightly too narrow and will not lock properly.

The Saint May 17th, 2008 01:22

Please research instead of pulling up such an old thread next time.

The KWA follows the TM Armalite design, it'll take any mags meant for TM Armalites on the market.

Some KJW P226 will take TM mags, some won't. The only way to find out is to buy one and see if you've got one that does.

Jaaks May 17th, 2008 01:54

yea I've done searches both on this forum and other airsoft forums and googled it with no specific answer to the proper fit of the mags. I understand that most KWA creates clones based on the TM designs but that doesn't mean the mags are 100% interchangable, at least I have not seen a specific post or anyone stating they have tried, hence me digging up this thread, after reading it.
I have read that it is possible to mess up mags if they don't lock and fit properly. Thus I'm wanted someone with first hand experience to help.

But I will likely do just that and purchase some TM mags and see if they fit.

pusangani June 18th, 2008 02:40

Hey does anyone know if the TM G26 Advance can use KJW G23 mags? a few reviews on Arnie's say yes, but I wanted to be 100% sure before buying

Thanks :)


All times are GMT -4. The time now is 03:30.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.