they carry revolvers now, wooo-hoo! :)

the one they have is really lame though.
gotta have them order some 8 inch barrels...

Just got my SRC M4A1....

-tip was painted orange, laquer thinner and a propane torch couldn't remove the paint, had to scratch it up with a dremel
-bolt jammed, dust cover didn't open, forced it a LITTLE (barely any more than normal force) and the tab that holds the dust cover closed snapped right off. Dust cover doesn't stay closed anymore, no big deal since its not a rare part or anything and works find with it open.
-slither stock is really wobbly, going to stick some 100mph tape on it to tighten it
-I think it may be shooting harder than advertised. It said 280fps on the site but it can easily go clear through both sides of a pop can so I'm thinking its more in the low 300's
-the two hicaps it came with work in my CA G36 with private parts armalite magwell conversion and my STAR L85. My STAR mags and CA mags (highs and lows for both) work fine in the SRC M4A1
-metal body seems to be really well done. It doesn't noticeably weigh less than my CA M15A4, no cracks, mold lines, flash, or air bubbles in it or the plastic parts.
-Had to tighten the bolts on the barrel same as everyone else to get rid of the barrel wobble but now its all solid.

Overall I'm quite happy with the quality and with buyairsoft.ca's service again. I've only shot about 100 rounds through it but it'll be used in a game this Saturday for its trial by fire

read some good reviews about the JG/Echo1 m4a1. Really does seem to outperform a TM m4a1 (except for cosmetic wise). I wanted a CA m15a4 at first but i read that the JG m4a1 uses some CA internals (gears or something) so its almost comparible? As for the gun weight, can someone tell me approx range the TM and CA weigh? According to many sources, JG weighs exactly or close to the TM. I know the TM is mainly made of ABS plastic but the CA has more metal possibly, I just want to know if they weigh almost the same since i want a gun that weighs closer to the real steel.

My CA weights a lot more then my friends TM by at least 1-2 lbs.

Does someone konw where they're located (province)?

Alberta

tnx

i think they are in Edmonton

i just orderd a Glock of them and looked at the shipping and it says that the package is from edmonton


will have to see how things work out

You have to be shitting me, read through this thread PLEASE!!

Red Deer, Alberta guys come on, this information is ON THEIR SITE

whatever it's on a flat part of canada that no one cares about :P j/k

anyways back on topic
i orderd a Glock 18C CYMA
so far the service i have gotten from buyaorsoft.ca has been good.
i made my order online wend moring and it was shiped later the same day.
recived the shiping number ETC. so far service has been good.

ill post pic's and reviews of the gun when i recive it.

Red Deer, Alberta

Outperforms? A TM is more accurate, the JG guns just have higher stock fps and thus have a longer range. Reliability wise a JG will never even approach a TM. The fps consistency is also part of performance, my JG AK fluctuates from 341 to 350fps so a range of 9fps, I've never owned a TM that had a range larger than 5. The JG will break down FAR before a TM will even strain, the cylinder head is plastic and the mechboxes show a lot more flaws, JG also doesn't stick in the front screw on the ver.3 mechboxes that keeps the mechbox from opening a gap at the front.

I'm not saying JG are crap, they are very decent especially for the price, I'm just saying they still aren't near a TM. If I had a choice for which gun I'd want to buy as a starter gun, TM all the way. But once you have one reliable gun if your looking to expand your collection for cheap to try out different models and such JG seems to be a very valid option.

For those who are looking for a good review of the JG G36C, Here It Is

Unfortunately the reviewer has only handled his friends TM/ICS/CA AEGs but has never owned one. The only guns he has owned are also China guns.
Kinda pointless if you ask me. Since we already know that new-to-airsoft people like the gun. Find me a newbie who doesnt love their gun....any gun.
There is a lack of reviews on the JG guns from experienced airsofters with long history using quality guns.

Its had an impressive showing thus far, and Id like to see JG come out with a full sized G36.

Holy cow, man. Relax a little. Try some decaff. This is supposed to be an informative site. DOn't have to rag on someone just because they're not quite as observant as you.

ASR has some decent overviews of the china guns from experianced users.

I am quite happy with their service, and the quality and performance of my Jing Gong G36C. I'll be getting an M4 and Beta Spets JG , as well as an ICS MP5 from buyairsoft.ca in the next few months.

thanks for that, a lot of helpful information to change my mind about it. It may be cheap but I'm thinking I might want to wait a while and save up for a CA. Is the stock CA M15A4 full metal? If so, what are some notable parts that are made from ABS plastic?

Plastic, ha, lets see, on My CA M15, buttstock, pistol grip, front hand grips, piston, and the outer casing on the wires, thats about all the plastic that I found.

Some hopup parts... the gears in particular, and one other piece. Then you have the... nozzle. Motor case.

That's probably it. The wires are silicone coated, not plastic per say.

The one thing that I did find with the cylinder head is that the metal nozzle thats on it is held in with plastic which broke and my cylinder head nozzle was "floating" inside the plastic nozzle which caused an air leak and much lower FPS (250fps with a PDI 140). I've since changed it with a guarder double O-ring cylinder head which is all metal, and is now firing at 366fps.

sorry for getting a little off topic but is the stock CA m15a4 powerful enough? Anything I should be pay more closer attention to?

310-320 out of the box, the only real weak point I found so far was that cylinder head. But then again I've done so much modding and tweaking to mine, the only original parts are the body and the gears, pretty much every thing else has been changed. Not that there was anything wrong with them, I just didn't want another M4 out with all the other M4's.

Does anyone know if the TSD M14 takes the KA low caps and if they hold up well?
mabey even a review by a owner was looking to get one as a project gun
or loaner
thanx
BooMs

Ordered a L96 from those guys, shipping was fast, but there's an orange tip on my gun!!!!

Friend ordered a JG G36C and I got to see it on Monday. Shoots 365-370 very consistently according to my chrony, body is pretty nice (plastic seems on par with TM) although seam lines were slightly larger. Internally, plastic bushings, plastic spring guide however there are CA gears.

The bad though was it had an electrical problem that affected the gun's shooting consistency, took me quite a bit of time to find out where the problem was. Will post a review with pictures shortly but thought some of you might like an update.

I've asked the same question to BIGMEDECIN and here what he wrote:

I ordered a set of mid-cap king arms mags for it, unfortunately there are very close but do not feed due to the mags BB feed well being slightly lower, not allowing the hop chambers tube to push the BB holding latch open to feed BBs, but it is only by about .005-.010 of an inch, I intend to build a brass ring that will press over the hop chamber extending it so it will go further into the mag, then all TM M-14 mags will work, as so should the Chines mags.

Is it removeable?

Painted on, so I'll have to spend some time to clean it.

thephenom do you happen to know if the Maruzen L96 mags will work with the Chinese version? When you get a chance, take some pics and post a review of it. I'm sure there are more people interested in that thing. :)

Does it shoot at ~460FPS as advertised?

My camera skills are far from l33t, but I'm going to compare it to my friend's L96 maybe this weekend. I'll compare the mags also. The chinasoft mags are uber plastic-ky and light. Not sure if the Maruzen one is the same, but I'll check also.

Can't say for sure, but it seems to shoot faster than all my AEGs (I have 2 that are in 370-400 range), and it's shoots slower than my stock KJW M700. So I'm guessing it's not far from the advertised speed.

The JG M4 that I got from them last week shoots constantly at 373fps with .20's, but mine also had a small electrical problem as well, it had a short that caused the fuse to blow. One of the gun plumbers in the team I'm with found it and fixed it, he also removed the fuse system. Oh, and it came with a bright orange flash hider, and the allan screw that holds it on was apoxied over so as to make it really hard to get out.

i believe the guns one will buy from them will have an orange tip, since their supplier is located in the states.

In their FAQ it does state that all guns come with a red tip.

Actually, it doesn't anywhere in their FAQ or on their website that any guns come with a orange tip..

Complete FAQ from Buyairsoft.ca.

[Where are you located?

Our warehouse is located in Central Alberta



How much is Shipping?

Average shipping costs are to addresses within Canada Only-

1x Pistol- $15.00

1x Rifle- $26.50

2x Pistols- $25.00

2x Rifles- $40.00

1x Pistol and 1x Rifle- $35.00



Do you ship to (where I live)?

If where you live is a Canadian address, we ship to you.



Is there any chance of my order from BuyAirsoft.Ca getting seized, or confiscated?

No. Being our warehouse is located within Canada, all of our products have already been cleared by Canada Customs. There for, all items that are “in-stock” no longer have any other “security checks” to go through. We GUARANTEE OUR ORDERS 100%. We have never had a single issue with a customer not receiving his/her order!



What methods of payment do you accept?

We accept all major CREDIT CARDS and PAYPAL. Currently we only accept payment through our online checkout done through paypal. However, you do not need a Paypal account. You can simply use your credit card information and pay for an item that way, without going through the hassle of setting up a Paypal account.



What is the best way to contact BuyAirsoft.Ca?

The only way we currently have available for the general public to contact us is through or email system. Our customer service is very quick at responding to emails. We try to have all emails responded to within 4-6 hours from the time we receive your enquiry. Please contact us HERE



Are there any other “hidden” fees?

All orders are subject to a standard $2.50 handling fee and a 6% GST charge on the product itself. Orders placed under $50 have an additional $5 low order fee attached. Other than these above mentioned costs, there are no hidden fees.



Can I order airsoft guns from outside of Canada?

Yes you can, and it will get CONFISCATED.]

Did i miss something?

I just pre-ordered a gun from them, if it comes with a orange tip does that mean the trades will be filled in too?

Trades wont be filled in

Oops.

You're right, it was actually in their 'Conditions'.

http://buyairsoft.ca/catalog/conditions.php

Well, thats a relief..

Orange tip can be delt with but no trades would be kinda lame..

Ahh, of course i read through the FAQs enought times to make even Greylocks proud but i didn't get past the 18+ in the conditions...

Oh well, a lil paint will fix that right up.

My son and I have purchased 4 hand guns from them, all orange tips but one, 2xG36C's no orange tips, M-14 orange tip, Well R-8 orange tip, AK-74 AND ICS M16 coming Likly will have orange tipS, at least the guns they get from the states will have them anyway (www.AIRSOFTSD.com).

All the hand gun ones pull out, just painted or sanded and painted over the rest.

After reading what some people have done with the orange tips, dremeling, snading, etc I though I'd share what I did with mine. I removed the flashhider and put it in a small jar of polystripper, in about 1 hour of just sitting there 90% of the ronage paint came off. I shook it around a bit in the jar and left it over night, next morning, not more orange:)

Interesting...my JG G36C did not have any orange paint on it at all. I got it from buyairsoft last month.

I'm one of those who would really appreciate a review of it ;)
At least, just some words about how it's working... and the name of the manufacturer (model)?

Hmm...My cousin (don't worry, over 18) ordered a CYMA G18C AEP from them, along with one of those sight deelies, and contrary to shipping speeds with other people, it hasn't even left the province. He ordered it last wednesday, it's now Monday and it hasn't even left the post office. This is what the tracking information said "2007/03/29 18:09 RED DEER, AB Item accepted at the Post office ". Again, that was 5 days ago. My cousin isn't a member on here, so does anyone have any information I can get to him?

thats the post offices fault not his.

Your first time with the post office or something?

They count BUSINESS days. March 29th is a Thursday, and Today is Monday, that's 3 days.

And Canada Post do not use real time tracking like UPS or FedEx.:rolleyes:

Where do you live, sometimes the post office won't update until the day of delivery.

Thanks for the info guys. My bad about counting weekends :banghead:


Cousin lives in Langham, Saskatchewan. Bout 20 minutes north of S'toon.

Oh shit you're in Saskatchewan, what's the expected delivery date? If it's WAY past that than you bitch at Canada post right away! Get a trace on the package and your money back for shipping!!

Well, just to clear it up, it's my cousins. I'm only 15 and don't currently airsoft. I just like to research so I'm best informed until I'm 18. Anywho, umm, well he forwarded the e-mail to me, and according to that, the expected delivery date was three days. Unless you were right about them not updating, it might be much longer. About the shipping refund, were you being sarcastic or serious?
Also, I heard some people in Saskatoon recieved theirs in under 48 hours, about that. Did you get updates, or was it updated only once it arrived? Thanks for your help so far guys.

Tell you cousin he should get a full refund on shipping, if it's been this long and your parcel hasn't showed up you should have the parcel tracked immediately. Contact BuyAirsoft as well.

Okay. My cousin and I tracked it again tonight, and now it's in Calgary for "sorting". He sent my cousin an e-mail estimating 3 days to his door, it's been four and it's only travelled about an hour/two hours worth to Calgary. So I know now that it's being updated, but I'm wondering what shipping method he must have used. My cousin is e-mailing BuyAirsoft about a refund for shipping, and I'll get back to you when he gets a response.

Uhmm .... its 3 BUSINESS days, the weekend doesn't count my friend, that may explain the issue.

He delivered it to the post office on Thursday, the 18th of March. It's now Monday, April 2nd. That's three business days, with an hour and a half of travel. I was checking out the Canada Post website, and they stated for Xpresspost "2 days shipping inbetween major cities". If I seem rude, I apologize, I'm just tired and trying to help my cousin out. Neither of us would mind four business days to my cousins house, since it would probably be an extra day out to Langham, but it's still frusturating the three day guarantee got it as far as Calgary.

I'm goin to bed, night.

If it was sent to the post office after the delivery truck has left for the day, the package wouldnt be processed and sent out till friday...then it would have probably sat in the sorting facility for the weekend if you were unlucky.

I bought a camelbak which was sent out on thursday and it arrived today (monday). Shipped from quebec to toronto.

Patience little grasshopper...

Heya,
Keep in mind too, that your cousins order is only 'checked in' to the post office, and not 'checked out' - it wont say anything like 'April 3/07 - left Red Deer - most likely it was recieved there and is enroute, the next update you should see is it being accepted somewhere close to your cousins home address. It most likely went by ground, given take the weekend it should be there by Friday.

That definitely does sound possible. Thanks for all the help guys. I guess we just never really thought about it not being shipped out that day. Sorry if that bit of the thread was a waste of time.

Expresspost delivery dates are crap. I don't think anything I've ever had sent via Expresspost has gotten here on the expected delivery date...it's always a few days late.

I would definitely call them and bitch at them if it's almost a month late though.

You can bitch @ Canada Post if they are one day late, if your persistent and have a very valid reason as to why you really needed it asap hence using Xpresspost than they'll refund you.

yeah if you walk in and put your balls on the table, you get your money back. You need to call first with the tracking number.

Haha, my girlfriends mom sent her a letter via Xpresspost, some required paperwork for her course due on a Tuesday it was sent out Thursday and was told it'd arrive Monday, it didn't come. She got it Tuesday JUST in time ... her mom bitcheedddd @ CP, they refunded the money and sent my gf an apology letter as well in case she didn't get the paperwork in on time lmao.

Anyways let's keep this thread towards BuyAirsoft.ca lmao

They just got a new shipment of guns in, some cheap GBBs and some more Jing Gong stuff, watchout for the ones that are only $185 though, they have PLASTIC gearboxes and are not 100% Marui Compatible!!

It seems a little underhanded to me not to mention that on their website.

They do mention it, you just got to read the fine print, it's the lower grade version of the Jing Gong's.

Ah, I see it now -"ABS Gearbox"- missed that the first few times I looked lol.

On another note, it looks like JG is actually making some pretty decent guns at low prices.

I got mine in under 48 hours. No updates, it's was more of...it said it got to the post office in Alberta and it wasn't updated again until it got to Saskatoon post office /out for delivery.

Where/when do you expect them to track it? It's not like they can do much more, since like it was said they only track input, not when it's output from a PO.

i paid the second half of a pre-order ics on thursday and have not recieved any info/tracking number yet. its not looking good

Well, he's been doing a lot of business lately, so he's probably just busy atm. Just like my problem, he dropped it off the DAY my cousin bought it, but I don't think he recieved tracking information for a while. I personally think he's a good retailer, and one I hit sweet 18 he will get my business. More than anyone I blame Canada Post.

You're 16 and they sold it to you. Boy oh boy ... this is bad.

Maybe it wasn't him that bought it... Parents, friends, etc, could have.

I know that, but he said he paid lol

yeah i paid and yes im 16, ofcourse with permission and maturity:)

How did you pay without a credit card?

I payed cash to my dad, and he used his card

Ooooh boy, Curtis, trust me don't get into this. You'll get flamed to hell. I personally attempted to gain respect on this site when I wanted to airsoft underage, and I had to lay low for a while. I'm back up now, but I'm waiting responsibly till 18! Trust me, if you want any respect on here, DON'T airsoft until you're 18. I've taken hunter safety, and got a 98% on my test. I go shooting at ranges with my father, I hunt, and I know for a fact none of these permit me to airsoft. I suggest you obey these rules too. Hey, I'm responsible as the next guy, which is exactly why I'm waiting.

yah i see your point, but personally i dont really care what others think of me on a site. they will never truly know me as a person, they can judge me as much as they want.

If you act bad here, this will be very true.

We can't stop you from breaking the rules, but at least, don't advertise it. That's not mature, at all.

Well first off, you're going to want to give up getting help on this site then. Also, if you're never going to know them in person, that means you aren't going to any games? What's the point of airsofting at all then?

Edit: OH I hope he sais he's gonna do backyard fun lmao...I guess we should get the greylocks call ready

i agree, and i dont believe i done anything wrong
I've been to a game already, and the guys there are really nice. i know how real airsoft looks and would never use it in a backyard.
as for this thread, its off topic

if you think you are mature enough then ok that's your business
just don't rant about how mature you are
it just makes you look immature

Its really interesting how much things have changed here since 01.... I swear the younger guys never got blasted so hardcore then...

Well I got flamed pretty bad last year, but I'm really starting to see why. Now I'm responsibly waiting until I'm 18, and I already have a lot more respect. Also, after having time to think about it, I definitely do see more than enough reasons adults don't want kids playing. Or maybe you're right and I just got owned to bad, who knows haha.

A couple years ago it was really bad... until some mods cracked down on it, and made a few bans (temp for most).

Jing Gong MP5 SD5/SD6
 

Just ordered this from them was wondering if anyone else has?
any opinions?

my review will come shortly after the gun shows up

Why order than ask?

Now its up to you to tell us ;)

I personally want to know about the new JG AK-47s'.

Cheers,
Alex

OK...back to the subject of the original thread. I have dealt with buyairsoft a few times now.
Their responses to my emails have been within 12 hours. In my last package that I got around Easter time, they threw in 1000 free .20 bbs for free... a nice gesture.
Recently I had a dud laser which was gimped right from the start. They are shipping me a new one, no problem.
So far I have nothing but good things to say about their customer service.
I also like the fact that I pay with Paypal. Depending on how I set up, it can be an electronic funds transfer through paypal...or I can use the credit card I have set up with Paypal. I like the fact I don't have to enter my card info on a the site each time I make a purchase. That's important to me.

just got the JG spetz and the VSR clone-both came quick and both look really good (have TM Ak, ICS AK, ICS M4, TM MP5). I have not fired the Ak but the feel is way better then the TM one I have. The mags fit perfectly with 0 movement. The VSR punches through the bottom of a coke can with .25's and can go through 1 1/2 can sides yet to cock it is very easy. I am not sure what that works out to in fps but so far so good. I have read that with a tightbore and a teflon mod they clock in at 470-490 fps. The gun is very light but weight can be added to the stock. I don't think it will match a real sniper platform but I wanted it to try out. Will put up more info once they get some use.

Don't they put a hold on it for 6-8 business days or something?

Only if it's a transfer from your account. If the money is already in Paypal or if it's via credit card, there's no wait time.

Well I just bought a A47-b(beta) off buy airsoft, for $300.00 shipping and all. As soon as I opened it up, found some scuff marks on the trigger and on the magg release. took off the hand grip, to find electric tape rapped around bottom of motor holding on wires, at that point I put another handle on, put in one of my 8.4 batteries loadded the mini high cap it comes with, and well there seamed to be feeding issues with it, so I then loadded one of my , TM lowcaps to try it, on fully auto, still had feeding issuse, but worked fine on semi auto, pulled out the mag to see if maby a bb jamed in body to see that the air nozzle wasn't positioned right. it looks like I will be takeing it apart tonight to see what else I can find.

I will say this , my rifle might have some issues but an other team mate bought a M4 clone as well, and his works perfect, I do find these to be a little louder then my TM AK47, but all in all 300.00 bucks it's still a good deal.

hope this might have answered some Questions out there.

Wasn't sure where to put this (review section?), but two reviews on the JG M4A1:

http://www.filairsoft.com/modules.ph...wtopic&t=23846

http://www.1stprotocol.com/Review/ECO1M4A1/

The JG clone of the VSR-10:

http://www.filairsoft.com/modules.ph...wtopic&t=10566

The JG M16A4:

http://www.filairsoft.com/modules.ph...wtopic&t=18208

http://www.airsoftretreat.com/review...uct=121&cat=63

http://www.arniesairsoft.co.uk/revie.../cat/16/page/1

The JG Steyr AUG: Buyairsoft does not carry this.

http://www.filairsoft.com/modules.ph...wtopic&t=21447

Glock 18C (CM030 by Cyma):

http://www.filairsoft.com/modules.ph...ewtopic&t=7314

http://www.airsoftretreat.com/review...uct=115&cat=29

AKSLR (CM031 by Cyma):

http://www.filairsoft.com/modules.ph...wtopic&t=14328

http://www.airsoftretreat.com/review...uct=165&cat=29

The WELL R8 (G3SAS):

http://www.arniesairsoft.co.uk/revie.../cat/16/page/1

http://www.airsoftretreat.com/review...uct=109&cat=29

The JG G36C:

http://www.arniesairsoft.co.uk/revie.../cat/16/page/1

http://www.airsoftretreat.com/review...uct=159&cat=63

Cyma MP5-J:

http://www.airsoftretreat.com/review...duct=90&cat=29

Ill try to buy a aeg from them one of these days to see if theyre good or not... I know price wise yes but ya Ive read alot of your posts so I may as well try it out.

This thread is for you to report your customer experience with them and the products you have bought from them, not I will buy from them one of these days. -_-

That and if they sell to him the will be selling to minors

I think it's been confirmed that buyairsoft has already sold to people under 18.

Well they don't have any method of checking if you're 18 ... we could just email them and tell them lol but that's always by-passable.

Usually the payment methods will make it impossible for minors to order, though, in the occasion that they can, it will at least show that their parents have bought for them. And parents will always be able to bypass the age checks, because they are (hopefully) over eighteen.

If a place starts offering guns by mail with mailed cash accepted as payment... Well... heh.;)

As long as they accept paypal minors can pay for stuff. Heck, that's how I do online orders. I don't have a credit card or anything so I have to do PP. Mark at A&A asked for my ASC username and even the guys at airsoftparts.ca ask for the ASC username for a preorder, eventhough they don't sell guns. IMO it wouldn't be hard for the guys at buyairsoft to do that.

Actually I attemeped to use Money Order and even told them my ASC username and they said Paypal only.